ANSI/TIA-1152
IEC 61935-1 Ed.4
The DSX provides better resolution than the minimum required for IEC 61935-1 Ed.4. It is worth investigating what resolution your vendor is using.
Frequency steps / resolution – DSX2-8000/DSX2-5000
Measurements such as Insertion Loss, NEXT and Return Loss are referred to as “swept frequency” measurements, meaning that certain points between the minimum and maximum frequency of the selected test standard are measured. It goes with out saying that if you only measure 100 points between 1 MHz and 1,000 MHz – it will make for a very quick test, but fail to provide the desired resolution.
So the field testing standards ANSI/TIA-1152 and IEC 61935-1 define the minimum frequency steps (resolution) for the test equipment vendors.
本文關鍵字:
原創標題：Frequency steps / resolution – DSX2-8000/DSX2-5000
原文鏈接：http://qqmmqq.cn/archives/frequency-steps-resolution.html
版權說明：本文為深圳市連訊達電子技術開發有限公司官網（qqmmqq.cn）版權所有。如果您需要轉載，請注明出處并保留原文鏈接！如為轉載文章會注明文章出處，轉載文章不代表本公司觀點。對于某些同行無恥惡意抄襲剽竊連訊客戶案例的違法行為，連訊將追究法律責任！
詳情請致電連訊公司：0755-83999818
新一代中文手持式測試儀 – 省時省力。
新一代中文手持式測試儀 – 省時省力。
新一代手持式網絡分析儀 – 省時省力。
新一代快速OTDR測試儀 – 省時省力。
